Transverse series is mainly used in the forming processing of plate's short side, our company transverse double end tenoner have DTX and DTS series,they are light-duty double end tenoner machine, they have high efficiency and strong practicablility, it,s an economical model machine suitable for the medium and small-sized enterprises,This model machine has been enthusiastically welcomed and favored by the customers immediately since it was firstly released; Main model; DTX15-8D,DTS15-10D,DTS25-12D and so on.
    DTEH series is a heavy-duty double end tenoner, it adopts the whole frame structure, upper pressing belt use active, stable performance and reliable quality, this machine process capability is greatly improved.

Technical parameters	DTX series	DTS series	DTEH series
Model	DTX15/25-8D	DTS15/25-10/12D	DTEH(K)15/25-10/12D
Workpiece width(mm)	70-300（600）
Workpiece length(mm)	400-1500/2500
Working thickness(mm)	4-50
Feeding motor power(kw)	3.7		4
Max.Feeding speed(m/min)	40		50
Max.insert height	5/7/12/(17)(Feeding speed adjustable to cutter volume)
Working table height(mm)	950
The 1ststation power(kw)	5.5	5.5	5.5
The 2st station power(kw)	5.5	5.5	5.5
The 3st station power(kw)	3	5.5	5.5
The 4st station power(kw)	3	3	5.5
The 5st station power(kw)	-	3	5.5
The 6st station power(kw)	-	-	5.5
Blow dust motor power(kw)	-	2×2.2	2×2.2
Adjust width motor power(kw)	1.1
Cutter diameter(mm)	200-220（250）
Spindle diameter(mm)	Ф40
Rotate speed of cutter shaft(rpm)	6000-7000
Dust hood dia(mm)	Ф120
Total power(kw)	38.8/43.2	54.2	75.5
Gross weight of equipment(kg)	6000	7000	9000

 

Remarks:Cutter shaft can use belt driven spindle,nut high speed shaft,hydraulic pressure high speed shaft,jumping knife system ways,special customization is allowed.

Our company reserves the right to make further technical improvement